Weigh Module Applications
Helm weigh modules provide 2 independent channels of weigh scale measurement. Each weigh module will accept two 350 ohm strain gages or up to four 700 ohm strain gages. The sensors are wired directly into the module, simplifying the installation. With a self-contained power source, no external amplification is required. Software is provided for gain and balance control. Calibration settings are programmable. Each weigh module is also compatible with the 1734, 1746, 1756 and 1769 series of programmable controllers.
- Automatic transfer of load cell weigh module information to PLC data table
- Built-in Tare function
- Internal gage excitation and signal conditioning
- No external amplification required
- Programmable calibration setting
- 16 bit A to D, Internal Conversion Rate 10 Microseconds
- Input Range .1mV/V to 4 mV/V
- Overall Module Accuracy is 0.01% of full scale
- Self Contained Power Source
| Platform | Model |
| 1746 | HM-604-WM |
| 1756 | HM-1756-SGI-WM |
| 1769 | HM-1525 |
| 1734 | HM-1734-WM |
| 1738 | HM-1738-WM |