AC      N10:1               "\\\Ch1 Trend"
AC      N10:11              "Load \Module \Test Value"
AC      N10:12              "\\Ch1 Load\at Angle"
RC  MOV N10:12              "
THIS RUNG OF LOGIC IS FOR\
LOAD AT ANGLE OPTION"
AC      N10:13              "Ch2 Load\at Angle"
AC      N10:16/0            "\Ch1 High\Capacity\Alarm"
AC      N10:16/1            "\Ch1 Low\Capacity\Alarm"
AC      N10:16/10           "\Ch1 Low\Track\Alarm"
AC      N10:16/11           "\Ch2 High\Track\Alarm"
AC      N10:16/12           "\Ch2 Low\Track\Alarm"
AC      N10:16/13           "\Ch1 \PressCurveAlarm"
AC      N10:16/14           "\\Ch2 \PressCurveAlarm"
AC      N10:16/2            "\Ch2 High\Capacity\Alarm"
AC      N10:16/3            "\\Ch2 Low\Capacity\Alarm\"
AC      N10:16/4            "\Ch1 High\Trend\Alarm"
AC      N10:16/5            "\Ch1 Low\Trend \Alarm\"
AC      N10:16/6            "\Ch2 High\Trend\Alarm"
AC      N10:16/7            "\Ch1 Low\Trend\Alarm\"
AC      N10:16/8            "DELTA \TRACK\FLAG"
AC      N10:16/9            "\Ch1 High\Track\Alarm"
AC      N10:17              "Ch1 Cal#"
AC      N10:18              "Ch2 Cal#"
AC      N10:2               "Ch2 Trend"
AC      N10:21/0            "SUMMATION OF ALL\TONNAGE\TOP STOP\ALARMS"
AC      N10:21/1            "SUMMATION OF CH1&CH2TONNAGE\E-STOP\ALARMS\"
AC      N10:21/2            "\Learn \Cycle DoneBit"
AC      N10:21/3            "Module\Status\Flag"
AC      N10:22              "LOAD MOD\XFER DATA\POINTER"
AC      N10:23/2            "\WAVE XFER\BUSY FLAG"
AC      N10:24              "Ch's 1&2\Tonnage\Module\Top Stop\Bits"
AC      N10:24/0            "Ch1 Top\Stop\High Cap.\Alarm\Indicator"
AC      N10:24/1            "Ch1 Top\Stop\Low Cap.\Alarm\Indicator"
AC      N10:24/10           "Ch1 Top\Stop\Low Track\Alarm \Indicator"
AC      N10:24/11           "Ch2 Top\Stop     \High TrackAlarm\Indicator\"
AC      N10:24/12           "Ch2 Top\Stop Low\Track\Alarm \Indicator"
AC      N10:24/13           "Ch1 E-StopPressCurveAlarm\Indicator"
AC      N10:24/14           "Ch2 \PressCurveTop Stop \Alarm\Indicator"
AC      N10:24/2            "Ch2 Top \Stop\High Cap.\Alarm\Indicator"
AC      N10:24/3            "Ch2 Top\Stop Low\Capacity\Alarm\Indicator"
AC      N10:24/4            "Ch1 Top\Stop\High TrendAlarm\Indicator"
AC      N10:24/5            "Ch1 Top\Stop\Low Trend\Alarm\Indicator"
AC      N10:24/6            "Ch2 Top\Stop\High TrendAlarm\Indicator"
AC      N10:24/7            "Ch1 Top\Stop \Low Trend\Alarm\Indicator"
AC      N10:24/9            "Ch1 Top\Stop \High TrackAlarm\Indicator\"
AC      N10:25              "Ch's 1&2\Tonnage\Module\E-Stop \Bits"
AC      N10:25/0            "Ch1 E-StopHigh Cap.\Alarm\Indicator"
AC      N10:25/1            "Ch1 E-StopLow Cap.\Alarm\Indicator"
AC      N10:25/10           "Ch1 E-StopLow Track\Alarm\Indicator"
AC      N10:25/11           "Ch2 E-StopLow Track\Alarm\Indicator"
AC      N10:25/12           "Ch2 E-StopLow Track\Alarm \Indicator"
AC      N10:25/13           "Ch1 E-StopPressCurveAlarm\Indicator"
AC      N10:25/14           "Ch2\PressCurveE-Stop\Alarm\Indicator"
AC      N10:25/2            "Ch2 E-StopHigh Cap.\Alarm\Indicator"
AC      N10:25/3            "Ch2 E-StopLow \Capacity\Alarm\Indicator"
AC      N10:25/4            "Ch1 E-StopHigh TrendAlarm\Indicator"
AC      N10:25/5            "Ch1 E-StopLow Trend\Alarm\Indicator"
AC      N10:25/6            "Ch2 E-StopHigh TrendAlarm\Indicator"
AC      N10:25/7            "Ch1 E-StopLow Trend\Alarm\Indicator"
AC      N10:25/9            "Ch1 E-StopHigh TrackAlarm\Indicator"
AC      N10:26/0            "Ch1 E-StopEnable forHigh Cap.\Alarm"
AC      N10:26/1            "Ch1 E-StopEnable forLow Cap.\Alarm"
AC      N10:26/10           "Ch1 E-StopEnable forLow Track\Alarm"
AC      N10:26/11           "Ch2 E-StopEnable forHigh TrackAlarm"
AC      N10:26/12           "Ch2 E-StopEnable forLow Track\Alarm"
AC      N10:26/13           "Ch1 E-StopEnable forPressCurveAlarm"
AC      N10:26/14           "\Ch2 E-StopEnable forPressCurveAlarm"
AC      N10:26/2            "Ch2 E-StopEnable forHigh Cap.\Alarm"
AC      N10:26/3            "Ch2 E-StopEnable forLow\Capacity\Alarm"
AC      N10:26/4            "Ch1 E-StopEnable forHigh TrendAlarm"
AC      N10:26/5            "Ch1 E-StopEnable forLow Trend\Alarm"
AC      N10:26/6            "Ch2 E-StopEnable forHigh TrendAlarm"
AC      N10:26/7            "Ch1 E-StopEnable forLow Trend\Alarm"
AC      N10:26/9            "Ch1 E-StopEnable forHigh TrackAlarm"
AC      N10:27/0            "Ch1 Top\Stop\Enable forHigh Cap.\Alarm"
AC      N10:27/1            "Ch1 Top\Stop\Enable forLow Cap.\Alarm"
AC      N10:27/10           "Ch1 Top\Stop\Enable forLow Track\Alarm"
AC      N10:27/11           "Ch2 Top\Stop \Enable forHigh TrackAlarm"
AC      N10:27/12           "Ch2 Top\Stop \Enable forLow Track\Alarm"
AC      N10:27/13           "Ch1 Top\Stop \Enable forPressCurveAlarm"
AC      N10:27/14           "Ch2 Top\Stop \Enable forPressCurveAlarm"
AC      N10:27/2            "Ch2 Top\Stop \Enable forHigh Cap.\Alarm"
AC      N10:27/3            "Ch2 Top\Stop\Enable forLow Cap.\Alarm"
AC      N10:27/4            "Ch1 Top\Stop\Enable forHigh TrendAlarm"
AC      N10:27/5            "Ch1 Top\Stop\Enable forLow Trend Alarm"
AC      N10:27/6            "Ch2 Top\Stop\Enable forHigh TrendAlarm"
AC      N10:27/7            "Ch1 Top\Stop\Enable forLow Trend\Alarm"
AC      N10:27/9            "Ch1 Top\Stop \Enable forHigh TrackAlarm"
AC      N10:28              "ALARM\POINTS"
AC      N10:29              "CH1 PEAK\IN TONS\FOR WAVE"
AC      N10:3               "Trending\Flag\Status"
AC      N10:30              "ALARM\ANGLE"
AC      N10:31              "CH1 AT\ALARM\ANGLE"
AC      N10:32              "CH2 AT\ALARM\ANGLE"
AC      N10:33              "CH1 AVG\IN TONS"
AC      N10:34              "CH2 AVG\IN TONS"
AC      N10:35              "CH1 REF\HI A/D\VALUE"
AC      N10:36              "CH1 REF\LO A/D\VALUE"
AC      N10:37              "CH2 REF\HI A/D\VALUE"
AC      N10:38              "CH2 REF\LO A/D\AND WAVE\QUALIFY"
AC      N10:39              "WAVE\HI/LO\AD VALUE"
AC      N10:40              "WAVE\HI/LO\AD VALUE"
AC      N10:41              "\CH2 PEAK\TONS FOR\WAVE\"
AC      N10:68              "LOAD MOD\HANDSHAKE\REG"
AC      N10:70/0            "TONS\PERCENT\BIT"
AC      N10:70/8            "DELTA\TRACK BIT"
AC      N10:8               "Ch1 Peak"
AC      N10:80              "WAVE XFER\COMPLETE\REGISTER"
AC      N10:9               "Ch2 Peak"
AC      N11:0               "Ch1 \Current\Waveform"
AC      N12:0               "Ch2\Current\Waveform"
AC      N14:1               "\\\Ch3 Trend"
AC      N14:11              "Load \Module \Test Value"
AC      N14:12              "\Ch3 Load\at Angle"
AC      N14:13              "Ch4 Load\at Angle"
AC      N14:16/0            "Ch3 High\Capacity\Alarm"
AC      N14:16/1            "Ch3 Low\Capacity\Alarm"
AC      N14:16/10           "\\Ch3 Low\Track Alrm"
AC      N14:16/11           "\\Ch4 High\Track Alrm"
AC      N14:16/12           "\\Ch4 Low\Track Alrm"
AC      N14:16/13           "\Ch3\PressCurveAlarm"
AC      N14:16/14           "\\Ch4\PressCurveAlarm"
AC      N14:16/2            "Ch4 High\Capacity\Alarm"
AC      N14:16/3            "Ch4 Low\Capacity\Alarm"
AC      N14:16/4            "Ch3 High\Trend Alrm"
AC      N14:16/5            "Ch3 Low\Trend Alrm"
AC      N14:16/6            "Ch4 High\Trend Alrm"
AC      N14:16/7            "\\Ch4 Low\Trend Alrm"
AC      N14:16/9            "\\Ch3 High\Track Alrm"
AC      N14:17              "Ch3 Cal#"
AC      N14:18              "Ch4 Cal#"
AC      N14:2               "Ch4 Trend"
AC      N14:21/0            "\\Ch's 3&4\Top Stop\Alarm"
AC      N14:21/1            "Ch's 3&4\E-Stop\Alarm"
AC      N14:21/2            "\Learn \Cycle DoneBit"
AC      N14:21/3            "Module\Status\Flag"
AC      N14:24              "Ch's 3&4\Tonnage\Module\Top Stop\Bits"
AC      N14:24/0            "Ch3 Top\Stop\High Cap.\Alarm\Indicator"
AC      N14:24/1            "Ch3 Top\Stop\Low Cap.\Alarm\Indicator"
AC      N14:24/10           "Ch3 Top\Stop\Low Track\Alarm \Indicator"
AC      N14:24/11           "Ch4 Top\Stop     \High TrackAlarm\Indicator\"
AC      N14:24/12           "Ch4 Top\Stop Low\Track\Alarm \Indicator"
AC      N14:24/13           "Ch3 E-StopPressCurveAlarm\Indicator"
AC      N14:24/14           "Ch4 \PressCurveTop Stop \Alarm\Indicator"
AC      N14:24/2            "Ch4 Top \Stop\High Cap.\Alarm\Indicator"
AC      N14:24/3            "Ch4 Top\Stop Low\Capacity\Alarm\Indicator"
AC      N14:24/4            "Ch3 Top\Stop\High TrendAlarm\Indicator"
AC      N14:24/5            "Ch3 Top\Stop\Low Trend\Alarm\Indicator"
AC      N14:24/6            "Ch4 Top\Stop\High TrendAlarm\Indicator"
AC      N14:24/7            "Ch4 Top\Stop \Low Trend\Alarm\Indicator"
AC      N14:24/9            "Ch3 Top\Stop \High TrackAlarm\Indicator\"
AC      N14:25              "Ch's 3&4\Tonnage\Module\E-Stop \Bits"
AC      N14:25/0            "Ch3 E-StopHigh Cap.\Alarm\Indicator"
AC      N14:25/1            "Ch3 E-StopLow Cap.\Alarm\Indicator"
AC      N14:25/10           "Ch3 E-StopLow Track\Alarm\Indicator"
AC      N14:25/11           "Ch4 E-StopLow Track\Alarm\Indicator"
AC      N14:25/12           "Ch4 E-StopLow Track\Alarm \Indicator"
AC      N14:25/13           "Ch3 E-StopPressCurveAlarm\Indicator"
AC      N14:25/14           "Ch4\PressCurveE-Stop\Alarm\Indicator"
AC      N14:25/2            "Ch4 E-StopHigh Cap.\Alarm\Indicator"
AC      N14:25/3            "Ch4 E-StopLow \Capacity\Alarm\Indicator"
AC      N14:25/4            "Ch3 E-StopHigh TrendAlarm\Indicator"
AC      N14:25/5            "Ch3 E-StopLow Trend\Alarm\Indicator"
AC      N14:25/6            "Ch4 E-StopHigh TrendAlarm\Indicator"
AC      N14:25/7            "Ch4 E-StopLow Trend\Alarm\Indicator"
AC      N14:25/9            "Ch3 E-StopHigh TrackAlarm\Indicator"
AC      N14:26/0            "Ch3 E-StopEnable forHigh Cap.\Alarm"
AC      N14:26/1            "Ch3 E-StopEnable forLow Cap.\Alarm"
AC      N14:26/10           "Ch3 E-StopEnable forLow Track\Alarm"
AC      N14:26/11           "Ch4 E-StopEnable forHigh TrackAlarm"
AC      N14:26/12           "Ch4 E-StopEnable forLow Track\Alarm"
AC      N14:26/13           "Ch3 E-StopEnable forPressCurveAlarm"
AC      N14:26/14           "\Ch4 E-StopEnable forPressCurveAlarm"
AC      N14:26/2            "Ch4 E-StopEnable forHigh Cap.\Alarm"
AC      N14:26/3            "Ch4 E-StopEnable forLow\Capacity\Alarm"
AC      N14:26/4            "Ch3 E-StopEnable forHigh TrendAlarm"
AC      N14:26/5            "Ch3 E-StopEnable forLow Trend\Alarm"
AC      N14:26/6            "Ch4 E-StopEnable forHigh TrendAlarm"
AC      N14:26/7            "Ch4 E-StopEnable forLow Trend\Alarm"
AC      N14:26/9            "Ch3 E-StopEnable forHigh TrackAlarm"
AC      N14:27/0            "Ch3 Top\Stop\Enable forHigh Cap.\Alarm"
AC      N14:27/1            "Ch3 Top\Stop\Enable forLow Cap.\Alarm"
AC      N14:27/10           "Ch3 Top\Stop\Enable forLow Track\Alarm"
AC      N14:27/11           "Ch4 Top\Stop \Enable forHigh TrackAlarm"
AC      N14:27/12           "Ch4 Top\Stop \Enable forLow Track\Alarm"
AC      N14:27/13           "Ch3 Top\Stop \Enable forPressCurveAlarm"
AC      N14:27/14           "Ch4 Top\Stop \Enable forPressCurveAlarm"
AC      N14:27/2            "Ch4 Top\Stop \Enable forHigh Cap.\Alarm"
AC      N14:27/3            "Ch4 Top\Stop\Enable forLow Cap.\Alarm"
AC      N14:27/4            "Ch3 Top\Stop\Enable forHigh TrendAlarm"
AC      N14:27/5            "Ch3 Top\Stop\Enable forLow Trend Alarm"
AC      N14:27/6            "Ch4 Top\Stop\Enable forHigh TrendAlarm"
AC      N14:27/7            "Ch4 Top\Stop\Enable forLow Trend\Alarm"
AC      N14:27/9            "Ch3 Top\Stop \Enable forHigh TrackAlarm"
AC      N14:3               "Trending\Flag\Status"
AC      N14:8               "Ch3 Peak"
AC      N14:9               "Ch4 Peak"
AC      N15:3               "LOAD MOD\SAMPLE\COUNTER"
AC      N17:0               "Ch's 1&2\PressCurve"
IC  COP N18:0               "Ch1 SampleWaveform"
IC  COP N19:0               "Ch2 SampleWaveform"
AC      N21:0               "Ch1 \Current\Waveform"
AC      N22:0               "Ch2\Current\Waveform"
AC      N23:0               "Ch3\Current\Waveform"
AC      N24:0               "Ch4\Current\Waveform"
AC      N31:0               "Ch's 1&2\PressCurve"
AC      N32:0               "Ch's 3&4\PressCurve"
AC      N51:0               "Ch3\Current\Waveform"
AC      N52:0               "Ch4\Current\Waveform"
AC      N53:0               "Ch's 3&4\PressCurve"
AC      N54:0               "Ch3 SampleWaveform"
AC      N55:0               "Ch4 SampleWaveform"
AC      N7:0                "# OF\TONNAGE\CHANNELS"
AC      N7:1                "PRESS #"
AC      N7:14               "LOAD AT\ANGLE\COUNTER"
AC      N7:15               "Tonnage\Function\Switch"
AC      N7:15/3             "\Bypass\Mode"
AC      N7:15/4             "\Tonnage\Module's\Peak Mode"
AC      N7:15/5             "Tonnage\Module's\Monitor\Parts Mode"
AC      N7:2/0              "Rev Load\Button\"
AC      N7:20/0             "cam cycle\bit"
AC      N7:20/1             "START/STOPBIT"
RC  OTE N7:20/1             "
This rung ends the routine to detect motion based off of resolver position."
AC      N7:20/11            "Low Alarm\Inhibit\Bit"
AC      N7:20/6             "Operator\Interface\Rev Load\Button"
AC      N7:20/7             "Operator\Interface\Tonn FaultReset"
AC      N7:21/2             "LEARN\CYCLE \COMPLETE"
AC      N7:21/4             "PressCurveWave Xfer\Enable Bit"
AC      N7:21/6             "current\wave xfer\enable bit"
IC  XIC N7:21/6             "CURRENT\WAVE\LOCK BIT"
AC      N7:21/8             "sample\wave xfer\enable bit"
IC  XIC N7:21/8             "SAMPLE\WAVE\LOCK BIT"
AC      N7:3/0              "Alarm\Reset\Button\"
AC      N7:4/0              "Bit 0 of \Sample\Setting"
AC      N7:4/1              "Bit 1 of\Sample\Setting"
AC      N7:4/2              "Bit 2 of\Sample\Setting"
AC      N7:4/3              "Bit 3 of\Sample\Setting"
AC      N7:4/4              "Bit 4 of\Sample\Setting"
AC      N7:4/5              "BIT 4\OF SAMPLE\SET"
AC      N7:55               "RESOLVER\DEGREE"
RC  MOV N7:55               "
This starts routine to detect motion based of resolver information."
AC      N7:63/0             "Operator\Interface\Resolver\Setup Bit"
AC      N7:63/1             "Operator\Interface\Resolver\Run Bit"
AC      N7:64/10            "RAMP\ANGLE UP\BIT"
AC      N7:64/3             "Operator\Interface\Change\Offset Bit"
AC      N7:64/4             "Operator\Interface\Clear\Offset Bit"
AC      N7:64/5             "PARTS \COUNTED\OUT BIT"
AC      N7:64/6             "PART \COUNTER\RESET BIT"
AC      N7:64/7             "DEC ANGLE\BIT"
AC      N7:64/8             "INC\ANGLE BIT"
AC      N7:64/9             "RAMP\ANGLE\DOWN BIT"
AC      N7:65               "UPDATE\COUNTER\VALUE\"
AC      N7:66               "PARTS\COUNT LOW\VALUE\"
AC      N7:67               "PARTS\COUNT HIGHVALUE"
AC      N7:70/0             "Tons\Percent\Bit"
AC      N7:70/8             "Delta \Track\Switch"
AC      N7:73               "SPM VALUE"
IC  MOV N7:78               "SAMPLED\VALUE"
AC      N7:79               "INTERNAL\SAMPLE\COUNT\REG"
AC      O:1.0/0             "\Resolver\Module\Setup Bit"
AC      O:1.0/1             "\Resolver\Module\Run Bit"
RC  OTE O:1.0/2             "
After power-up and timer times out old resolver offset value is resent to helm 
resolver module. "
RC  MOV O:1.1               "
When this button is pressed, the offset value to the helm resolver module is 
cleared to zero. This should be done before entering or changing the resolver 
offset value. "
AC      O:2.6               "Ch 1\High~\Low\Trend AlrmSettings"
AC      O:2.7               "Ch 2\High~\Low\Trend AlrmSettings\"
AC      O:3.0/0             "Cam Cycle\Bit"
AC      O:3.0/1             "\\Bypass\Mode"
AC      O:3.0/2             "Peak Mode"
AC      O:3.0/3             "Monitor\Parts Mode"
AC      O:3.0/4             "Module\Alarm\Reset Bit"
AC      T4:0                "RESOLVER\SAMPLE\TIME"
AC      T4:1                "MACHINE\OFF TIME"
IC  TON T4:2                "Power-Up\Delay\Timer"