Helm-Pak HMC-2420 Press Control
HMC Series Total Press and Automation Control
- OSHA and ANSI Compliant Control Systems
- Inch, Single Stroke, and Continuous Modes of Operation
- Dual Allen-Bradley MicroLogix PLC's
- Allen-Bradley Emergency Stop Dual Channel Safety Relay
The compact design of the HMC press control features interactive touch screen display for ease of set-up and operation, with job recipe storage.
- Anti-Tiedown and Anti-Repeat Feature for Run/Inch Pushbuttons
- Dual Press Position Resolver with Mounting Backet
- Selectable Resolver Count Direction From HMI
- Light Curtain Upstroke Muting On/Off Selectable From HMI
- Minimum Light Curtain Distance (Inches) Displayed on HMI
- Automatic Top Stop Speed Compensation (Up To 100SPM)
- 90° Brake Stopping Time Test
- Brake Stopping Time Monitor (Displayed in milli-seconds)
- 6 Channels of Die Monitoring (DM) with Static, Cyclic, and In-Position Modes (Top Stop, E-Stop, or Warning selectable for each channel)
- 4 Channels of Programmable Limit Switches (PLS) with Angle and Timer Modes
- 100 Count Job Storage for Die Monitoring and Programmable Limit Switches
- Lube Control with Start/Stop, Cyclic, or Timed Modes
- Parts Counter (0-999999)
- Extensive System Diagnostics (Alarms) Displayed on HMI
- Side Panel Control Buttons Included - Control Power Off/On (Keyed Switch) - Control Power Reset (Lighted Pushbutton) - Emergency Stop (Lighted Pushbutton) - Fault Reset (Lighted Pushbutton) - Inch/Single/Continuous Selector Switch - Main Motor Forward/Reverse Selector Switch - Main Motor Start (Lighted Pushbutton) - Main Motor Stop Pushbutton
- User Inputs for Monitoring - External Top Stop Signal - External Emergency Stop Signal - Main Motor Auxiliary Contact - Clutch/Brake Air Pressure - Counterbalance Low Pressure Switch - Light Curtain
- User Outputs for HMC Press Control - Output Contact for Main Motor Forward Control - Output Contact for Main Motor Reverse Control - Output Contact for Lube Motor Control