PAC-10 Press Automation Controller
PAC-10 Features
- 8 Die monitoring inputs
- 12 Programmable outputs
- 100 Job memory
- Shut height display
- Brake monitors
- Accumulative clutch counter
- Light Curtain interface
- Programmable security codes
- Fault history
PAC-10 is a full function automation controller that combines multiple functionality with a very user friendly design. As a resolver based system, the PAC-10 will fully automate and control your mechanical stamping presses.
Selectable PLS Outputs
Job Set-up
Shut Height Display
Die Monitoring Outputs
Counters
Password
Add two or four channels of tonnage monitoring to the PAC-10 with the Helm PTM-1 signal conditioning module. This din rail mounted module supplies 0-10 VDC output to the PAC-10 controller.
| Power Supply: | 24vdc 1amp |
| Temperature: | 0-50 °C |
| Display: | LCD: 128 x 128 Angle display: 0-359° Screen resolution: 1° Max speed: 1,000 spm |
| Indicating lamps: | 36 angle 22 status |
| PLS settings: | 1-359° |
PM03 MODULE
| Input channels: | 24 Input voltage: 24 vdc Max input current: 20 mA |
| Output channels: | 16 transistor outputs Supplied voltage: +24v Output voltage: +24 Max output: 0.5A |
CRANK ANGLE RESOLVER
| Voltage frequency: | 7Vrms 10KHz |
SHUT HEIGHT INCREMENTAL ENCODER
| Power supply voltage: | 12V DC |
| Response frequency: | 0-100 KHz |