HMC Series Total Press and Automation Control
- OSHA and ANSI Compliant Control Systems
- Inch, Single Stroke, and Continuous Modes of Operation
- Dual Allen-Bradley MicroLogix PLC’s
- Allen-Bradley Emergency Stop Dual Channel Safety Relay
The compact design of the HMC press control features interactive touch screen display for ease of set-up and operation, with job recipe storage.
- Anti-Tiedown and Anti-Repeat Feature for Run/Inch Pushbuttons
- Dual Press Position Resolver with Mounting Backet
- Selectable Resolver Count Direction From HMI
- Light Curtain Upstroke Muting On/Off Selectable From HMI
- Minimum Light Curtain Distance (Inches) Displayed on HMI
- Automatic Top Stop Speed Compensation (Up To 100SPM)
- 90° Brake Stopping Time Test
- Brake Stopping Time Monitor (Displayed in milli-seconds)
- 6 Channels of Die Monitoring (DM) with Static, Cyclic, and In-Position Modes (Top Stop, E-Stop, or Warning selectable for each channel)
- 4 Channels of Programmable Limit Switches (PLS) with Angle and Timer Modes
- 100 Count Job Storage for Die Monitoring and Programmable Limit Switches
- Lube Control with Start/Stop, Cyclic, or Timed Modes
- Parts Counter (0-999999)
- Extensive System Diagnostics (Alarms) Displayed on HMI
- Side Panel Control Buttons Included
– Control Power Off/On (Keyed Switch)
– Control Power Reset (Lighted Pushbutton)
– Emergency Stop (Lighted Pushbutton)
– Fault Reset (Lighted Pushbutton)
– Inch/Single/Continuous Selector Switch
– Main Motor Forward/Reverse Selector Switch
– Main Motor Start (Lighted Pushbutton)
– Main Motor Stop Pushbutton - User Inputs for Monitoring
– External Top Stop Signal
– External Emergency Stop Signal
– Main Motor Auxiliary Contact
– Clutch/Brake Air Pressure
– Counterbalance Low Pressure Switch
– Light Curtain - User Outputs for HMC Press Control
– Output Contact for Main Motor Forward Control
– Output Contact for Main Motor Reverse Control
– Output Contact for Lube Motor Control
